Get Adobe Flash player

Our Product Range

XCD Polymer

GLO XCD 1000

Zameet Limited at its manufacturing Facility in Gujarat, India manufactures one of the most Popular Viscosifiers for the Oilfield Industry chemically Known as XCD Polymer.
GLO XCD 1000
XCD Polymer manufactured by Zameet Limited is a high molecular weight Xanthum Gum biopolymer. It used to viscosify water based drilling and completion fluids.It is primarily a viscosity modifier for Freshwater and Salt Saturated Muds.

XCD Polymer manufactured by Zameet Limited is used in drilling and completion fluids to enhance their rheology, ensuring efficient whole cleaning.  It provides optimum whole cleaning and suspension qualities.

Common Name: 
Xanthum Gum Polymer /XCD Polymer


  • It provides excellent suspension properties restricting the settlement of weighting agents and drilled cuttings
  • It is stable over a wide pH range and is effective in saturated brines as well as fresh and sea water base drilling fluids
  • It is resistant to bacterial fermentation.

Physical Properties:





Creamish-White Free Flowing Powder

Bulk density (kg/m3)

650 -850

Ph(1% solution)



Stable up to 150 Deg C

Viscosity (1% KCl)

>1200Mpa s

Moisture Content

15% max

Rheological Measurement

At 3 Rpm >12.5


Non Toxic

Mesh size

80 Max



GLO XCD 1000 (XCD Polymer) manufactured by Zameet Limited should be added Slowly through the hopper to prevent lumping .the time required for the product to yield to its ultimate viscosity depends on the salinity, temperature and Shear. The amount of the Viscosifier to be used will depend on the desired viscosity but normal dosage ranges from 0.5-2.5 lb/bbl(1.43-7.1 kg/m3 ) the concentration may be increased to 4lb/bbl(11.5 kg/m3) in case of difficult hole cleaning conditions.

XCD Polymer manufactured by Zameet Limited is packed in 25kg or 50 Lbs (22.68 Kg) sacks. Private Labeling and customized packaging is also available on request

Safety and Handling:
XCD Polymer manufactured by Zameet Limited must be handled as a Industrial chemical, wearing protective equipment and observing the precautions as mentioned in the MSDS.